Background

Using The Home Water Pressure Regulator To Control Water Pressure

By Patrice McCoy


Uncontrolled speed or velocity at which water streams from the tap or hose pipes in residential areas can lead to destruction or wear of many appliances that use or rely on this commodity for their operations. However, one cannot entirely eliminate the uncertainty that the force at which taps stream will be higher than the required. This means that a home owner must know signs that will indicate a fault in the home water pressure regulator.

In many homes, there are many appliances that may suffer malfunctions due to uncontrolled water-force. Equipments such as heaters, angle tops, faucets, closets, dish washers, hose bib and washing machines are at risk of malfunctioning since they are normally connected directly to the tap line. If the gauge in your house has readings that are above the 75 pounds per square inch, then this is a red flag for uncontrolled velocity in the pipes.

There are numerous symptoms that the regulating equipment will produce indicating faults in various sections. Among the signs are peculiar sounds such as humming, whistling and chattering from the regulator valves, low flow from fixtures and outlets, unsteady flow, and slowed velocity build up. The following section will explain each of these signs, their implications and how to conduct troubleshooting remedy.

Whistling, humming and chattering sounds from valves will be a result of extremely high velocity in the conduits. Hearing such sounds from valves and joints might indicate that the valves are too small to accommodate the force of stream or the pipes are so narrow that they cannot allow large volumes of flow at high velocity. This means that the diameter of the pipes should be increased of the velocity should be reduced.

Every residence that is piped with municipal supply has a gauge that is located downstream. There is normally a hose bib connecting to the pipe from just above the regulating device. It must be ascertained that the hose bib comes after the regulating device for proper functioning.

The presence of dirt particles and debris materials inside the regulating screen may lead to clogging, which reduces the velocity of flow. This issue could also be solved without engaging the services of a plumber since the regulating device often comes with troubleshooting notes that can be of great use. If the user can successfully open the gauge, then he can use the guide to clean all components.

Most regulators come with a uses manual that can be used for reference when faced with such situations, although the procedures for most models and brands are almost similar. There are some models which have arrows engraved on the caps indicating which direction the cap should be turned either to increase or decrease the velocity. It should be noted that malfunctioning regulating devices may leak or block passage if the knob is turned.

In the event that the gauge or the regulating device is faulty, one should seek for the services of a qualified plumber. These incidences can significantly be minimized is an efficient home water pressure regulator is installed by a qualified plumber. This will reduce chances of property destruction.




About the Author:



Categories:

Leave a Reply

Powered by Blogger.